Download PDFs of the Typical Architectural Details from the Technical Design Guide below:

	Architectural Details			Panelizations Options			Structural/ Connection Details			Erection Guides/ Lift-and-Release™

Typical Architectural Details (Individual Files)

Download individual AutoCAD or PDFs files below. Navigate to specific sections with these links:

Architectural Details (Drawings A-1 thru A-15)
Click on links below to view AutoCad or PDFs of SLENDERWALL^® Typical Details

DRAWING TITLE	DRAWING NO.
Typical SLENDERWALL® Section	A-1	A-1.dwg	A-1.pdf
Typical Window Detail	A-2	A-2.dwg	A-2.pdf
Typical Floor Detail	A-3	A-3.dwg	A-3.pdf
Typical Roof Detail	A-4	A-4.dwg	A-4.pdf
Typical Ground-Level Detail	A-5	A-5.dwg	A-5.pdf
Typical Reveal	A-6	A-6.dwg	A-6.pdf
Panel Profiles & Projections	A-7	A-7.dwg	A-7.pdf
Typical Corner Details	A-8	A-8.dwg	A-8.pdf
Modular Brick Coursing at full Brick Panels	A-9	A-9.dwg	A-9.pdf
Modular Brick Coursing at Precast Perimeter Band	A-10	A-10.dwg	A-10.pdf
Brick Corner Return	A-11	A-11.dwg	A-11.pdf
Precast Corner Return	A-12	A-12.dwg	A-12.pdf
Mitered Brick Corner	A-13	A-13.dwg	A-13.pdf
Brick Spandrel Panel with Precast Bands	A-14	A-14.dwg	A-14.pdf
Illustrative Custom Corner Details	A-15	A-15.dwg	A-15.pdf

back to top       

Panelization Options (Drawings P-1 thru P-4A)
Click on links below to view AutoCad or Pdfs of SLENDERWALL^® Typical Details

DRAWING TITLE	DRAWING NO.
Spandrels and Column Covers - Option 1	P-1	P-1.dwg	P-1.pdf
Building Section - Option 1	P-1A	P-1a.dwg	P1a.pdf
Horizontal Window Units - Option 2	P-2	P-2.dwg	P-2.pdf
Building Section - Option 2	P-2A	P-2a.dwg	P-2a.pdf
Vertical Window Units - Option 3	P-3	P-3.dwg	P-3.pdf
Building Section - Option 3	P-3A	P-3a.dwg	P-3a.pdf
Warehouse Panels - Option 4	P-4	P-4.dwg	P-4.pdf
Building Section - Option 4	P-4A	P-4a.dwg	P-4a.pdf

back to top       

Connection / Structural Details (Drawings S-1 thru S-20)
Click on links below to view AutoCad or Pdfs of SLENDERWALL^® Typical Details

DRAWING TITLE	DRAWING NO.
Gravity Connection at Cast-in-Place Slab	S-1	S-1.dwg	S-1.pdf
Gravity Connection at Post-Tensioned Slab	S-2	S-2.dwg	S-2.pdf
Gravity Connection at Steel-Edge Angle	S-3	S-3.dwg	S-3.pdf
Gravity Connection at Steel Beam	S-4	S-4.dwg	S-4.pdf
Bearing Connection at HollwCore Plank	S-5	S-5.dwg	S-5.pdf
Gravity Connection at HollowCore Plank (Parallel)	S-6	S-6.dwg	S-6.pdf
Gravity Connection at HollowCore Plank (Perpindicular)	S-7	S-7.dwg	S-7.pdf
Gravity Connection at HollowCore Plank (Parallel Option)	S-8	S-8.dwg	S-8.pdf
Gravity Connection at HollowCore Plank (Perpindicular Option)	S-9	S-9.dwg	S-9.pdf
Tie-Back at Cast-in-Place Slab	S-10	S-10.dwg	S-10.pdf
Tie-Back at Post-Tensioned Slab	S-11	S-11.dwg	S-11.pdf
Tie-Back at Steel-Edge Angle	S-12	S-12.dwg	S-12.pdf
Tie-Back at Steel Beam	S-13	S-13.dwg	S-13.pdf
Tie-Back Connection (Parallel Option)	S-14	S-14.dwg	S-14.pdf
Tie-Back Connection (Perpindicular Option)	S-15	S-15.dwg	S-15.pdf
Tie-Back at HollowCore Plank (Parallel)	S-16	S-16.dwg	S-16.pdf
Tie-Back at HollowCore Plank (Perpindicular)	S-17	S-17.dwg	S-17.pdf
Base Connection at Grade Level Panel	S-18	S-18.dwg	S-18.pdf
Base Connection at Grade Level Panel (Close-up Expansion Anchor)	S-19	S-19.dwg	S-19.pdf
Panel-to-Panel Tie-Back Connection	S-20	S-20.dwg	S-20.pdf

back to top       

Erection Guides / Lift and Release (Drawings E-1 thru E-4)
Click on links below to view AutoCad or Pdfs of SLENDERWALL^® Typical Details

DRAWING TITLE	DRAWING NO.
Lift-and-Release System - Temporary Tie-Back	E-1	E-1.dwg	E-1.pdf
Lift-and-Release System - Landing Detail	E-2	E-2.dwg	E-2.pdf
Lift-and-Release - Landing System (View 1)	E-3	E-3.dwg	E-3.pdf
Lift-and-Release - Landing System (View 2)	E-4	E-4.dwg	E-4.pdf

back to top 
 

	You will need Autodesk installed on your system in order to view these DWG documents. Click here to download.
	You will need Adobe Acrobat Reader installed on your system in order to view these PDF documents. Click here to download.