 |
 |
 |
||
 |
Architectural Precast Concrete
|
|
||
|
||||
 Mr. Doug Carter, AIA, NCARBDavis, Carter, Scott
Woodlands I, Columbia, MD “For this project, SlenderWall was cheaper, better and faster to install than alternative construction methods. After all of the options were evaluated, the obvious choice was SlenderWall.” View Project Edward N. Rothe, FAIA Rothe-Johnson-Fantacone Associates
Rutgers - Health Insurance Plan Building, New Brunswick, NJ
 “What
attracted us to this product is the 2-inch thick precast concrete in
an economical panelized format with steel-stud backup. This significantly
reduced the cost of the structural frame and foundation required to
support this much lighter system. Thus, we could achieve the beauty
of a precast concrete or masonry exterior in a more cost-effective
and efficient manner. Currently, we are on our fifth project using
SlenderWall.” View Project  Mr.
Allen TrousdaleGRAD Associates
Bradley Hall Building, Newark, NJ “The SlenderWall panels were pre-insulated at the factory and were used to re-clad a deteriorated, turn-of-the-century industrial structure. The system installation integrated easily with the custom windows of our design. SlenderWall is a significant and permanent improvement to the existing building.” View Project  D.R. Brasher, Architects
Woodlands II, Columbia, MD “First, the system allows us to achieve our desired design of combined masonry and precast in one panel with significant savings over conventional brick veneer and precast. Secondly, we could construct a building with a masonry appearance in the dead of winter without cold weather delays and added costs for winterized construction.” View Project  Gary
P. Santos, ArchitectNew Jerusalem Baptist Church, Queens, NY “SlenderWall just makes sense. The SlenderWall system is the only product that can cost-effectively clad the building and provide the desired finish. SlenderWall is lightweight, easy to install, and keeps costs down — something we can’t get with any other product.” View Project 
 Mitch
Weber, PrincipalHeffner & Weber
BWI Corporate Center I, Linthicum, MD
“Curved panel applications are easily accommodated with SlenderWall. The combination of design choices, flexibility and cost savings has resulted in our choice of SlenderWall on several high profile projects.” View Project
Huntington Hospital, Huntington, NY
Tom LePage, Project EngineerBarr & Barr “Our overall objectives of design flexibility, sound construction, and speed of building erection – all at economical costs – were made possible with the SlenderWall panel system.” Victor Famulari, R.A., NCARB
Smith-Palmer & Famulari, Ltd.
 Andrew RashidWeihe Design Group
Seven Skyline Park, Falls Church, VA View Project 
 |
||||
|
||||
 |
 |
 |
